Every artist may need a mat board cutter in their artworks. If an artist wants to sell more works of art, he needs to use the right materials. This is indispensable in expanding his business. A cleaner cut may only be achieved by using the proper materials and cutters for the job. Here are some mistakes that you must avoid as you cut the boards to avoid ruining your work.
Over cut is a very common problem. If the blade has sunk deep into the board, you may cut more than what you need. You may destroy a portion of your work. A popular cause for this is the wrong positioning of the blade. If not overly cut, the mat may be undercut instead. This is when you cut the mat lighter than it is supposed to be. This may lead to jagged corners and uneven insides.
There are other instances when the blades start to follow a different path. It may have strayed out of the line that you laid out earlier. This condition is called the wings or cutting outside the corners. This is usually caused by deep cuts that cause the blade to bend towards the external parts of the materials.
Even dull blades can be a cause of problem. If the blades are not sharp, the cuts may be uneven. The outcome may not be as visually appealing. It is advisable to only use sharp blades. If the cutters have become really dull, then replace them right away. The blades must be used properly and the boards must be made of the highest quality. This helps keep the blades sharp.
Cheaper boards may contribute to the problem, too. It is wrong to think that you can save when you use poor quality boards. Remember that the quality of the boards you use can alter the cuts. In turn, this can affect the overall worth of your artwork. In reality, your loss is greater than your savings.
Some artists may try to cut more than one mat at a time. Bundling two or more mats makes it more difficult to cut them. If you insist, you can only get inconsistent cuts. Slight movements of the board may affect its incisions. If you put the mats together, the problem may get even more apparent.
Artists may also be wary of clamp marks. This is caused by the clamps that are used when holding the mats in place while he boards are cut. This prevents the blades from slipping and shifting. If the blades slip, the board may be damaged and the material is ruined.
It is also important that the right boards and cutter are used. When the edges are not even, the entire work may not look appealing. The backing sheets must be cut smoothly as well. To do this, you need to use the right boards and cutters at all times.
Even the blade's angling also matters. The mat board cutter must be tilted at forty-five degrees for a better outcome. Keeping the proper angle is difficult, though. Let alone the inconsistencies in the materials. To be safe, it is highly advisable that you use the right cutter at all times.
Over cut is a very common problem. If the blade has sunk deep into the board, you may cut more than what you need. You may destroy a portion of your work. A popular cause for this is the wrong positioning of the blade. If not overly cut, the mat may be undercut instead. This is when you cut the mat lighter than it is supposed to be. This may lead to jagged corners and uneven insides.
There are other instances when the blades start to follow a different path. It may have strayed out of the line that you laid out earlier. This condition is called the wings or cutting outside the corners. This is usually caused by deep cuts that cause the blade to bend towards the external parts of the materials.
Even dull blades can be a cause of problem. If the blades are not sharp, the cuts may be uneven. The outcome may not be as visually appealing. It is advisable to only use sharp blades. If the cutters have become really dull, then replace them right away. The blades must be used properly and the boards must be made of the highest quality. This helps keep the blades sharp.
Cheaper boards may contribute to the problem, too. It is wrong to think that you can save when you use poor quality boards. Remember that the quality of the boards you use can alter the cuts. In turn, this can affect the overall worth of your artwork. In reality, your loss is greater than your savings.
Some artists may try to cut more than one mat at a time. Bundling two or more mats makes it more difficult to cut them. If you insist, you can only get inconsistent cuts. Slight movements of the board may affect its incisions. If you put the mats together, the problem may get even more apparent.
Artists may also be wary of clamp marks. This is caused by the clamps that are used when holding the mats in place while he boards are cut. This prevents the blades from slipping and shifting. If the blades slip, the board may be damaged and the material is ruined.
It is also important that the right boards and cutter are used. When the edges are not even, the entire work may not look appealing. The backing sheets must be cut smoothly as well. To do this, you need to use the right boards and cutters at all times.
Even the blade's angling also matters. The mat board cutter must be tilted at forty-five degrees for a better outcome. Keeping the proper angle is difficult, though. Let alone the inconsistencies in the materials. To be safe, it is highly advisable that you use the right cutter at all times.
No comments:
Post a Comment